Macroscopic Polarization Change of Mononuclear Valence Tautomeric Cobalt Complexes Through the Use of Enantiopure Ligand

The crystallization of a complex having electron transfer properties in a polar space group can induce the polarization switching of a crystal in a specific direction, which is attractive for the development of sensors, memory devices, and capacitors. Unfortunately, the probability of crystallization in a polar space group is usually low. Noticing that enantiopure compounds crystallize in Sohncke space groups, this paper reports a strategy for the molecular design of non-ferroelectric polarization switching crystals based on the use of intramolecular electron transfer and chirality. In addition, this paper describes the synthesis of a mononuclear valence tautomeric (VT) cobalt complex bearing an enantiopure ligand. The introduction of enantiomer enables the crystallization of the complex in the polar space group (P2₁). The polarization of the crystals along the b-axis direction is not canceled out and the VT transition is accompanied by a change in the macroscopic polarization of the polar crystal. Polarization switching via electron transfer is realized at around room temperature.     

Helicate tris(aryl)carbinolates bearing pendant NR2 donors – a new family of supporting ligands for the synthesis of Sc3+ alkyl complexes

The reactions of aryllithium reagents o-LiC₆H₄CH₂NR₂ with (MeO)₂CO afford two new tris(aryl)carbinols bearing pendant-NR₂ donor groups in the side chain [o-R NCH C H ] COH [R = Me, R + R = (CH) ]. These alcohols feature helical chirality due to differently inclined aromatic fragments and are presented in a crystalline cell as two M and P enantiomers. Carbinol (R = Me) readily reacts with (Me3SiCH2)3Sc(THF)2 to give a scandium bis(alkyl) complex [(o-C₆H₄CH₂NMe₂)₃CO]Sc(CH₂SiMe₃)₂ featuring rigid binding of the alkoxy anion through a κ¹-O, κ²-N chelating coordination mode     

Theoretical study on the mechanism for the excited-state double proton transfer process of an asymmetric Schiff base ligand

Excited-state double proton transfer (ESDPT) in the 1-[(2-hydroxy-3-methoxy-benzylidene)-hydrazonomethyl]-naphthalen-2-ol (HYDRAVH₂) ligand was studied by the density functional theory and time-dependent density functional theory method. The analysis of frontier molecular orbitals, infrared spectra, and non-covalent interactions have cross-validated that the asymmetric structure has an influence on the proton transfer, which makes the proton transfer ability of the two hydrogen protons different. The potential energy surfaces in both S₀ and S₁ states were scanned with varying O-H bond lengths. The results of potential energy surface analysis adequately proved that the HYDRAVH₂ can undergo the ESDPT process in the S₁ state and the double proton transfer process is a stepwise proton transfer mechanism. Our work can pave the way towards the design and synthesis of new molecules.     

Syntheses and structures of two novel fluorescent metal–organic frameworks generated from a tridentate donor–acceptor motif ligand

The tridentate organic ligand 4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoic acid ( H₃L ) has been synthesized (as the methanol 1.25‐solvate, C₄₈H₃₉NO₆·1.25CH₃OH). As a donor–acceptor motif molecule, H₃L possess strong intramolecular charge transfer (ICT) fluorescence. Through hydrogen bonds, H₃L molecules construct a two‐dimensional (2D) network, which pack together into three‐dimensional (3D) networks with an ABC stacking pattern in the crystalline state. Based on H₃L and M(NO₃)₂ salts (M = Cd and Zn) under solvothermal conditions, two metal–organic frameworks (MOFs), namely, catena‐poly[[triaquacadmium(II)]‐μ‐10‐(4‐carboxyphenyl)‐4,4′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6‐diyl)dibenzoato], [Cd(C₄₈H₃₇NO₆)(H₂O)₃]_n, I , and poly[[μ₃‐4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoato](μ₃‐hydroxido)zinc(II)], [Zn₂(C₄₈H₃₆NO₆)(OH)]_n, II , were synthesized. Single‐crystal analysis revealed that both MOFs adopt a 3D structure. In I , partly deprotonated HL ^2? behaves as a bidentate ligand to link a Cd^II ion to form a one‐dimensional chain. In the solid state of I , the existence of weak interactions, such as O—H…O hydrogen bonds and π–π interactions, plays an essential role in aligning 2D nets and 3D networks with AB packing patterns for I . The deprotonated ligand L ^3? in II is utilized as a tridentate building block to bind Zn^II ions to construct 3D networks, where unusual Zn₄O₁₄ clusters act as connection nodes. As a donor–acceptor molecule, H₃L exhibits fluorescence with a photoluminescence quantum yield (PLQY) of 70% in the solid state. In comparison, the PL of both MOFs is red‐shifted with even higher PLQYs of 79 and 85% for I and II , respectively.     

A Comparative Study of the Semiconductor Behavior of Organic Thin Films: TCNQ-Doped Cobalt Phthalocyanine and Cobalt Octaethylporphyrin

The structure formed by cobalt phthalocyanine (CoPc) and cobalt octaethylporphyrin (CoOEP) with electron-acceptor tetracyano-π-quinodimethane (TCNQ), was studied by Density Functional Theory (DFT) methods. According to theoretical calculations, both cobalt systems can establish dispersion forces related to TCNQ and also in both cases the link between them is built by means of hydrogen bonds. Based on the results of these DFT calculations, we developed experimental work: the organic semiconductors were doped, and the thermal evaporation technique was used to prepare semiconductor thin films of such compounds. The structure of the films was studied by FTIR and Raman spectroscopy. The optical properties of the CoPc-TCNQ and CoOEP-TCNQ films were investigated by means of UV-Vis measurements. The results obtained were used to estimate the type of transitions and the optical bandgap. The results were compared to the previously calculated theoretical bandgap. The CoOEP-TCNQ film presented the smallest theoretical and experimental bandgap. Finally, the electrical properties of the organic semiconductors were evaluated from a PET (polyethylene terephthalate)/indium tin oxide (ITO)/cobalt macrocycle-TCNQ/silver (Ag) device we prepared. The CoOEP-TCNQ-based device showed an ohmic behavior. The device manufactured from CoPc-TCNQ also showed an ohmic behavior at low voltages, but significantly changed to SCLC (space-charge limited conductivity) at high voltage values.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Electronic Transitions in Different Redox States of Trinuclear 5,6,11,12,17,18-Hexaazatrinaphthylene-Bridged Titanium Complexes: Spectroelectrochemistry and Quantum Chemistry

Multinuclear transition metal complexes bridged by ligands with extended π-electronic systems show a variety of complex electronic transitions and electron transfer reactions. While a systematic understanding of the photochemistry and electrochemistry has been attained for binuclear complexes, much less is known about trinuclear complexes such as hexaphenyl-5,6,11,12,17,18-hexaazatrinaphthylene-tristitanocene [(Cp₂Ti)₃HATN(Ph)₆]. The voltammogram of [(Cp₂Ti)₃HATN(Ph)₆] shows six oxidation and three reduction waves. Solution spectra of [(Cp₂Ti)₃HATN(Ph)₆] and of the electrochemically formed oxidation products show electronic transitions in the UV, visible and the NIR ranges. Density functional theory (DFT) and linear response time-dependent DFT show that the three formally titanium(II) centers transfer an electron to the HATN ligand in the ground state. The optically excited transitions occur exclusively between ligand-centered orbitals. The charged titanium centers only provide an electrostatic frame to the extended π-electronic system. Complete active self-consistent field (CASSCF) calculation on a structurally simplified model compound, which considers the multi-reference character imposed by the three titanium centers, can provide an interpretation of the experimentally observed temperature-dependent magnetic behavior of the different redox states of the title compound in full consistency with the interpretation of the electronic spectra.     

Palladium‐Catalyzed Direct C2‐Arylation of an N‐Heterocyclic Carbene: An Atom‐Economic Route to Mesoionic Carbene Ligands

Blocking the C2 position of an imidazole‐derived classical N‐heterocyclic carbene (NHC) with an aryl group is an essential strategy to establish a route to mesoionic carbenes (MICs), which coordinate to the metal via the C4 (or C5) carbon atom. An efficient catalytic route to MIC precursors by direct arylation of an NHC is reported. Treatment of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr) with an aryl iodide (RC₆H₄I) in the presence of 0.5 mol % of [Pd₂(dba)₃] (dba=dibenzylideneacetone) precatalyst affords the C2‐arylated imidazolium salts {IPr(C₆H₄R)}I (R=H, 4‐Me, 2‐Me, 4‐OMe, 4‐COOMe) in excellent (up to 92 %) yields. Treatment of {IPr(C₆H₅)}I with CuI and KN(SiMe₃)₂ exclusively affords the MIC–copper complex [(IPrPh)CuI].